PDA

View Full Version : Guidelines About Industry Oriented Mini Project



Pages : [1] 2 3

prashanth
01-29-2010, 07:26 PM
The objective of this document is to present the general guidelines for the writing up of a proper mini-project report.

All JNTU B-Tech III-II have to do a industry oriented mini project which is implemented by JNTU from R05 batch.

We were very confused as to what we had to do as this was only a mini project on whether we have to go to industry,scope of project etc.But as in most colleges we were given choice to a study project or kit based and this could be done in an Institute,Industry or own.Most of chose to do a study project and were given permission for this and we had to submit this report as soon as IV/I starts and had to work on project in III/II break.This project will be evaluated during IV/II (Along with the Final or Main Project).

Basically in this mini project student can take up any Industry oriented application in his/her field of interest in their respective field/branch.First one has to submit an Abstract of the project to their concerned department head (HOD) and once he approves it ,he will assign a project guide to the individual or batch after this project work is to be started. Generally batch for a mini project may have 1 to 3 members in it.


Impotant Points:

1. There is no page limit only thing to be considered is that concept is complete.
2. One must acquire all data and concepts related to one's project.
3. The Format Guidelines given by respective Dept.heads for report layout.
4. Project should have good idustry oriented applications.
5.The industry oriented mini project shall be submitted in report form and should be presented before the committee, which shall evaluate for 50 marks.
The committee consists of an external examiner, head of the department, the supervisor of mini project and senior faculty member of the department.
6.There shall be no internal marks for industry oriented mini project.

Ask following questions before you join any company for project

http://forum.jntuworld.com/showthread.php?7184-Ask-following-questions-before-you-join-any-company-for-project

Guidelines to prepare project documentation.

http://jwfiles.net/qzaow85n5jre/GuidelinestopreparePROJECTSDOCUMENTATION.rar.html

Sample Project Documentation

http://jwfiles.net/5lcko9ad2zba/SampleProjectDocumentation.pdf.html

The below info will give you the complete and detailed description of the mini projects reports.

It is essential that you produce a clear and concise report that reflects the literature survey, problem identification, project aims and objectives, the engineering design work carried out, tests performed and discussion of results. The emphasis should not be on the length of the report, but rather on the way by which the above aspects are presented In this context, you should avoid downloading bulk text and images from books or the Internet or use unconventional fonts or graphics with a view to impressing the reader You should rather show the reader that you have understood the problem at hand and used an engineering approach to produce a working solution by working as a team with your group members. You should also be able to explain the working principle and design of each stage of the developed system.Reviews will be conducted by your college in order to know the progress of your project work( 2 to 3 reviews will be taken generally).

REPORT FORMAT :

With the format given below, the mini-project report should normally not exceed 30 pages(excluding the appendix), and should not be shorter than 20 pages.

Font and Size :

• For Chapter Numbers and Titles: Times New Roman Size 18, Bold, Centered, Upper-Case.
• Sections Numbers and Titles: Times New Roman Size 14, Bold, Left aligned • Sub-section Numbers and Titles: Times New Roman Size 12, Bold, Left aligned • For the main text: Times New Roman Size 12, Justified.

NOTE :

• Do NOT put the Chapter Number and Title on a separate Page.
• If there are less than four lines remaining at the bottom of the page, start the new section or subsection on the following page.

Paragraphs and Line Spacing :

1.5 throughout. Leave a blank space from one paragraph to another.

Margins :

Top, Bottom, Right: 25mm; Right: 30mm.

Headers/ Footers :

Times New Roman Size 10.

Equations :

Should be edited with Microsoft Equation, and should be numbered in ascending order in each chapter:

E.g:
http://img230.imageshack.us/img230/944/equationex.jpg

is the first Equation in Chapter 2.


Page Numbers :

Start with Page 1 at the beginning of Chapter 1. Page numbers should be centered at the bottom of the page.

Figures and tables :

• Position Figures and Tables as close as possible to the text where they are referred.
• Figures and Tables should be numbered in ascending order for each chapter, using the same sequence as for Equations.
• The number of the figure, and its caption should be typed immediately below it in Times New Roman Size 12.
• The number of the table and its caption should be typed immediately above it in Times New Roman Size 12.

TITLE PAGE : The title page should include the following information:

• Mini-Project Title
• Student Names and ID Nos.
• A statement that the report is submitted in partial fulfillment of the requirements for Practical Training of the B.Eng. (Hons) in Electrical and Electronic Engineering.
• Date of submission


TABLE OF CONTENTS : The table of contents should list all the chapters, sections and other parts of the report, along with their page numbers. In particular the following should be included:

http://i46.tinypic.com/28rcmqc.jpg

NOTE: The above page numbers are given as examples only.

ACKNOWLEDGEMENT : Any person, institution, organization, department or lab, whose help or support you want to acknowledge for the project.

ABSTRACT : A summary of 300 to 400 words of the practical application, the problem to be solved, the approach used and the main results obtained.

LIST OF FIGURES : A list of all Figure Numbers presented in the report, and their title (E.g. Figure 2.1 Circuit diagram of the Traffic Light Controller) along with the page numbers.

LIST OF TABLES : A list of Table Numbers presented in the report and their title, along with the page numbers.


All the best to all B.Techs.

For Some Mini Projects u can visit the below link

http://forum.jntuworld.com/forumdisplay.php?31-Mini-Projects

computerscience
01-29-2010, 07:45 PM
really thanx admin........

maahi
01-29-2010, 07:50 PM
Thats really really helpful!!!!!!

I have a question....

How many pages can be dedicated to the "About the Organization".....?

Administrator
01-29-2010, 08:09 PM
Thats really really helpful!!!!!!

I have a question....

How many pages can be dedicated to the "About the Organization".....?


3 to 5 pages are enough

maahi
01-29-2010, 08:27 PM
Okay... As I go through my own report, I will be asking few (or maybe a lot) doubts...

My next doubt is that, for the main matter to be kept as "Justified" wont look good.....


It would make it look like this

Whereas other sentences will be like this.

anushadikkala
01-29-2010, 08:42 PM
thanks so much for the info.... it wil be really helpful for all 3-2 students..:)

Raghu
01-29-2010, 09:30 PM
Thanx a lot... :)

bharathkumar11
01-30-2010, 08:01 PM
hi this is baharath kumar am doing final year civil engineering and i want some information on microscopic traffic simutation am doing my main project on this topic..plz give me some details

santhu143
01-30-2010, 08:06 PM
thanks a lot....
this will help to all thwe b-tech students..

sravan143sweety
01-30-2010, 09:40 PM
Hi sir we need ELECTRONICS(ECE) projects.can u help us

sravanadithya
01-30-2010, 10:43 PM
hi good job 4r u
!!!!!!!!!!!!!thanx.

ravi21kumar
01-30-2010, 10:45 PM
thanx alot

raptor786
01-31-2010, 12:08 PM
Thanks to you for this precious Info as i was searching this matter for a few days and then i found it on world website. thanks a lot man this was really helpful solving my doubts.....

nareshforuforever
01-31-2010, 05:34 PM
its very helping to us....

harish_20790
01-31-2010, 07:37 PM
thnx a lot prashanth.. Nyc work done for sake of all of us..
Thanx a lot 1ce again...

bangs
02-01-2010, 02:23 PM
sir i want information about technicalfests that are going to be held in hyderabad engineering colleges.
sir pls try to give info as fast as possible

jaggu715
02-02-2010, 04:57 PM
hii thnks fr info it help ful to all 3-2 students

adikusingh
02-02-2010, 08:51 PM
a grat job done by u which is help full to all 3-2 students.

adikusingh
02-02-2010, 08:58 PM
can u please give me some more information on how to select topic for mini projects
i mean that think that i don't know any thing and from that prospective please guide me.

msrivarna
02-02-2010, 09:00 PM
sir we r the students of second year IT branch and we would like to do a small project regarding our branch...can u plz provide the required details like wht shud be done and whom shud we consult?plz provide us the complete information as much as u can....

Srikanth..
02-02-2010, 09:02 PM
for some details on mini projects check dis link http://www.jntuworld.com/index.php/board,20.0.html @ srivarna

gatla.nani12
02-02-2010, 10:17 PM
thanks admin for the Guidelines About Industry Oriented Mini Project ........
thank u very much

srikiran519
02-05-2010, 08:13 PM
hai.this is srikiran doing btech 3_2sem cse thank u very much for providing valuable info.regarding mini project

saisrikanth2149
02-28-2010, 08:33 AM
thanq very mch admin

sumanth580
03-07-2010, 06:02 AM
thank u so much for this post